Clamping Levers

?* Information on days to ship and prices

• • Recommendation

  

  Position Adjustable Clamping Lever Screw Included, Thrust Bearing Included

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.
  · The threaded part can be replaced.
  · Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
  · No scratches formed on the applicable parts as the seat surface does not move.
  · A high amount of pretension can be applied to the threaded part so it will not readily loosen.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	21.51 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Recommendation

  

  Eccentric Quick Clamp Lever Nut Included

  HALDER

  [Features]
  · Enables quick and reliable attaching and detaching of components.
  · Adjustable type uses the lock nut to adjust the direction the lever faces.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.35 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamp Levers / Threaded

  MISUMI

  [Features] One of the most versatile clamping levers. [Clamp Type] Clamping mechanism, "working direction" horizontal.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	Same day

• 

  Eccentric Quick Clamp Lever Screw Included

  HALDER

  [Features]
  · Enables quick and reliable attaching and detaching of components.
  · Adjustable type uses the lock nut to adjust the direction the lever faces.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.10 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flat Tension Levers

  MISUMI

  [Features] It is a universal flat clamping lever.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	27.07 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam Lever

  MISUMI

  One quick release lever. [Features]Clamp "Clamp type" cam mechanism, "Working direction" vertical.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Miniature Clamp Levers / Threaded

  MISUMI

  [Features] A miniature clamping lever with a short lever.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.81 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Push Button Clamp Levers

  MISUMI

  [Features] The serration can be easily loosened by pressing the head of the screw with the thumb.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.43 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping levers with eccentrical cam with threaded stud, Lever zinc die casting

  GANTER

  Clamping levers with eccentrical cam GN 927 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927, clamping forces of up to 8 kN can be reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.72 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ERZ. - Adjustable handles -Technopolymer steel or stainless steel clamping element

  ELESA

  Adjustable handles.
  Glass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish. Built-in zinc alloy toothed insert for coupling to the metal clamping element.
  Indicated when the lever turning angle is limited owing to lack of space.
  Retaining screw with six-lobed socket to fit TORX® tool

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.30 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flat Clamp Levers

  MISUMI

  [Features] It can be used without interference when there is no upper space.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.68 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam levers with external thread (K0005)

  KIPP

  · Cam levers can be used to clamp workpieces quickly and torque-free
  
  · Advantage: workpiece needs no further securing
  
  · Application fields: machine and assembly construction, rehabilitation and medical technology
  
  · Steel or stainless steel version
  
  · Colours: black or ruby red

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.75 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamp Lever (FKF, FKR)

  IMAO CORPORATION

  Machine lever for tightening and loosening screws without tools.
  [Features]
  ・ In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged.
  ・ After tightening, you can turn the lever freely to any position.
  ・ Can be used in tight places where a lever cannot be turned 360°.
  ・ After screw tightening, the lever can be moved to an arbitrary position.
  ・ Main unit available in 4 colors (silver, black, red and orange).
  [Applications]
  ・ For position-adjusting parts, such as slides and slotted holes, etc.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.39 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjustable flat tension levers with threaded stud, Steel

  GANTER

  The overall height of flat tension levers GN 125 is reduced to a minimum.
  As all other adjustable levers, they are ideal when-ever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	23.08 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Resin Clamp Levers / Straight Handle

  MISUMI

  [Features] A universal clamping lever. [Material] Resin type

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.31 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamp Nut Lever Weld Type

  HALDER

  [Features] cheaper version of DIN99. [Clamp Type] Clamping mechanism, "working direction" horizontal.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.11 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjustable flat tension levers with tabbed bushing, Steel

  GANTER

  The overall height of flat tension levers GN 125 is reduced to a minimum.
  As all other adjustable levers, they are ideal when-ever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	22.86 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam Clamp

  HALDER

  [Features]
  · Clamp lever position can be freely changed based on selection.
  · If the thrust washer is removed, this can be used as an infinitely adjustable stopper.
  · Left rotation type can also be provided through special order.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	53.94 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Double Arm Clamp Levers

  MISUMI

  [Features] Butterfly-shaped clamping lever. [Material] Available in stainless steel or steel.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.30 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Position Adjustable Clamping Lever

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	18.02 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping levers with eccentrical cam, Lever Stainless Steel

  GANTER

  Clamping levers with eccentrical cam GN 927.5 with Stainless Steel-internal thread are used for rapid clamping and releasing operations. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping position.
  There are no loose components since they are all assembled and mounted in their correct order.
  The salient points of type A are as follows:
  The distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut.
  This allows the max. clamping force to be set by a simple adjustment. In addition this also allows the choice of the preferred lever position in relation to the clamping lever pin.
  With these clamping levers with eccentrical cam GN 927.5, thrusts of up to 8 kN can be reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.70 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping bolts, downward clamping, Steel

  GANTER

  Clamping bolts GN 918.2 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.
  The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
  Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
  The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	45.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping levers with eccentrical cam, Lever zinc die casting

  GANTER

  Clamping levers with eccentrical cam GN 927.4 with Stainless Steel-internal thread are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam, clamping forces of up to 8 kN can be reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.14 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Clamping levers with eccentrical cam

  GANTER

  Stainless Steel-Clamping levers with eccentrical cam GN 927.7 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927.7, clamping forces of up to 8 kN can be reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	21.02 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  For Axle Pin Eccentric Lever

  HALDER

  [Features] Used together with parts such as eccentric lever EH23390.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Eccentric Lever Shaft Pin Included

  HALDER

  [Features]
  · Operating temperature range: plastic grip type maximum 60°C.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	27.96 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Eccentrical cams, radial clamping, Stainless Steel

  GANTER

  Eccentrical cams GN 918.5 allow the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. The cam not only has the advantage that the clamping effect is of the same magnitude over the whole of the clamping surface (i.e. in every angular position), but also that it is self-arresting in every position.
  The ball lever is linked with the eccentric cam via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the "readjustment" of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the eccentric cam can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	78.00 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  LAC. - Cam clamping levers -Technopolymer

  ELESA

  Cam clamping levers
  Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
  Cam lever is a device which allows a quick and secure clamping.
  The LAC-R model with adjustable ring-nut (ELESA patent) offers quick and secure clamping.
  The knurled ring-nut on the base allows to adjust the clamping force applied while locking the lever in the desired position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam Lever (QLCA)

  IMAO CORPORATION

  [Features]
  · Since the screw part rotates in the male screw type, the direction of the lever can be adjusted arbitrarily.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	35.50 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Cam Lever (KCL, KCLS, KCLF)

  IMAO CORPORATION

  Once screwed in proper position, clamping / unclamping can be done by lever up / down operation. Excellent rust prevention stainless steel type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Ratchet Lever (RL)

  IMAO CORPORATION

  All SCM made, this ratchet type lever handle appears heavy.
  
  [Features]
  · Powerful ratchet lever that works in both forward and reverse directions.
  · Demonstrates good strength when working in narrow places

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	169.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjustable flat tension levers with tabbed stud, Stainless Steel

  GANTER

  The overall height of Stainless Steel-Flat tension levers GN 125.5 is reduced to a minimum.
  As all other adjustable levers, they are ideal whenever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	33.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamping levers with eccentrical cam with internal thread, Lever steel

  GANTER

  Clamping levers with eccentrical cam GN 927.3 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927.3, clamping forces of up to 8 kN can be reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.88 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam levers with quick lock (K0751)

  KIPP

  · KIPP cam levers can be used to clamp workpieces quickly and torque-free
  
  · Advantage: workpiece needs no further securing
  
  · Application fields: machine and assembly construction, sheet metal working, fixture construction
  
  · Metal plates can be precisely positioned by snapping into the spring clip
  
  · Various versions

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ratcheting Clamp Levers

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	22.00 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flat Tension Lever (FTF, FT)

  IMAO CORPORATION

  In this type, when the lever is pulled the serrations mesh and the lever becomes free. Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
  
  [Features]
  · Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
  · If interference of the lever occurs during operation, a short lever can be installed and used

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	36.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Clamping bolts, upward clamping, Steel

  GANTER

  Clamping bolts GN 918.1 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the clamping bolt is self-arresting.
  The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
  Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
  The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	45.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping levers with eccentrical cam with threaded stud, Lever steel

  GANTER

  Clamping levers with eccentrical cam GN 927.3 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927.3, clamping forces of up to 8 kN can be reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.36 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping levers with eccentrical cam, Lever Stainless Steel

  GANTER

  Stainless Steel-Clamping levers with eccentrical cam GN 927.5 with Stainless Steel-threaded stud are used for rapid clamping and releasing operations. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping position.
  There are no loose components since they are all assembled and mounted in their correct order.
  The salient points of type A are as follows:
  The distance between the eccentrical cam and the contact surface is adjustable by means of a fine threaded knurled nut.
  This allows the max. clamping force to be set by a simple adjustment. In addition this also allows the choice of the preferred lever position in relation to the clamping lever pin.
  With these Stainless Steel-Clamping levers with eccentrical cam GN 927.5 , thrusts of up to 8 kN can be reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.42 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Double cam levers, Stainless Steel

  GANTER

  Stainless Steel-Double cam levers GN 917.1 are used for repositioning and clamping. The eccentrical cam has the advantage that the clamping force remains constant in every position of its travel and in addition is self arresting.
  The dimension b2 is made to match the head size of swing bolts DIN 444 and swing nuts GN 444.2 respectively.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	75.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stop locks

  GANTER

  Stop locks GN 720 may be used as stops and feature a high degree of stability.
  The inside ball-spring latching mechanism has 4 latching positions at a distance of 90° each. Thanks to the bolt attachment using the countersunk screw, the latching position is freely selectable.
  The bar is solid and may be machined, if required.
  The countersunk screw is enclosed as part of the set.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	22.22 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  L.652-X - Adjustable T-Handles -Technopolymer

  ELESA

  Adjustable T-Handles.
  Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.
  Glass-fibre reinforced technopolymer clamping element with toothing and retaining pin, black colour.
  Particularly suitable when clamping operations are limited owing to lack of space and the hand of the operator cannot make a complete rotation.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.09 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  MR. - Adjustable handles -Technopolymer

  ELESA

  Glass-fibre reinforced polyamide based (PA) technopolymer, black, orange, grey colours, matte finish.
  Glass-fibre reinforced technopolymer clamping element, AISI 302 stainless steel return spring.
  Indicated when the lever turning angle is limited owing to lack of space.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.61 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping levers external thread (K0122)

  KIPP

  · The KIPP clamping lever stands for reliability, stability and versatility
  
  · Makes it easier to clamp individual components and complete machine parts
  
  · Application fields: machine construction, plant construction, rehabilitation and medical technology, furniture industry
  
  · Different thread sizes and handle lengths

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.32 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levers DIN 99, Form N, with internal thread (K0174)

  KIPP

  · Versatile use through gluing or pinning
  
  · Reliable and stable
  
  · Application fields: fixture and plant construction

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.28 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...