ideanote
inCAD Library

Make sure to read this before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. MISUMI reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

Features of inCAD Library

  1. Get great new design ideas for these application examples.
  2. Over 200 design application ideas collected from dozens of industries!

  3. Find application examples quickly! Search by function, workpiece shape, etc.

  4. Download the CAD models for each application example.
  5. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! Button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Back to top

inCAD Library Keyword Search
inCAD Library No. Search

No.000240 Round pin escape & carry

A mechanism to re-arrange the pitch of workpieces in a stocking mechanism.

Single Axis Robots

Product name Single Axis Robots RS2/Linear
Part number RS212-C1-N-3-150
Features Max. Load Capacity: 10kg (Horizontal), 2kg (Vertical); Stroke: 50~800mm; Max. Velocity: 1000mm/sec
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Single axis robot is selected by pitch arrangement.

Available sizes

■Single Axis Robots (RS, slider type, no brake)

Height
(mm)
Type Lead
(mm)
Stroke
(specify in 50mm increment)
59 RS1 2 50-400
6
12
57 RS2 6 50-800
12
20
60 RS3 6 50-800
12
20

Back to page top

Selection steps

■Single axis robot selection steps

Load Capacity

Stroke

Cycle time or Max. Speed

Detail confirmation

Back to page top

Accuracy Info

■Accuracy of Single Axis Robot

Height
(mm)
Type Lead
(mm)
Stroke
(specify in 50mm increment)
Positioning Repeatability
(mm)
59 RS1 2 50-400 ±0.02
6
12
57 RS2 6 50-800 ±0.02
12
20
60 RS3 6 50-800 ±0.02
12
20

Back to page top

Performance info.

■Speed/Load of Single Axis Robot (Load Information)

Type Lead
(mm)
Max Load Capacity (kg) Allowable Moment (N・m) Max. Velocity (mm/s)
Horizontal Vertical Pitching Yawing Rolling Stroke(mm)
50 100 150 200 250 300 350 400
RS1 2 6 4 19 16 17 100
6 4 2 300
12 2 1 400 ~ 600
Type Lead
(mm)
Max Load Capacity (kg) Allowable Moment (N・m) Max. Velocity (mm/s)
Horizontal Vertical Pitching Yawing Rolling Stroke(mm)
50 ~ 600 650 700 750 800
RS2 6 10 2 33 25 30 300 280 250 220 190
12 6 1 400 ~ 600 560 500 440 380
20 4 - 350 ~ 1000 933 833 733 633
Type Lead
(mm)
Max Load Capacity (kg) Allowable Moment (N・m) Max. Velocity (mm/s)
Horizontal Vertical Pitching Yawing Rolling Stroke(mm)
50 ~ 600 650 700 750 800
RS3 6 12 4 38 32 34 300(250) 280(250) 250 220 190
12 8 2 400 ~ 600(500) 560(500) 500 440 380
20 6 - 350 ~ 1000 933 833 733 633

Values in ( ) are for vertical application.

Back to page top

Welded Steel Stands

Product name Welded Steel Stands/Plate Type
Part number YSFP100-B50-H125-F30-G80-M6
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Selected a welded steel stand to absorb vibration and prevent mis-catching.

Available sizes

■Welded steel stand (plate type)

Material Surface Treatment
EN 1.0038 Equiv. -
Black Oxide Coating
Electroless Nickel Plating
EN 1.4301 Equiv. -

■Sizes and Dimensions

Type Horizontal Vertical Height Vertical Hole Pitch Horizontal Hole Pitch Hole Type Selection
No Surface Treatment


Black Oxide Coating


Electroless Nickel Plating


Stainless Steel
100 50 50 ~ 200 15 ≤ Vertical Hole Pitch
≤ Vertical - 20
80 M6 Tap


Ø6.5
60
70
80
100
120 50 90 ~ 100
60
70
80
100
120
150 50 105 ~ 130
60
70
80
100
120
150
200 50 130 ~ 180
60
70
80
100
120
150
200

Back to page top

Adjusting Stopper Screws

Product name Adjusting Stopper Screws/Hexagon Socket/L Configurable/Fine Thread
Part number ANBNS5-25
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Suitable for height adjustment and fine tuning.

Available sizes

■Adjusting Stopper Screws - Hex Socket Type

Adjusting Material Hardness Surface Treatment
Fine Thread EN 1.1191 Equiv. 45-50HRC Electroless Nickel Plating
Trivalent Chromate
EN 1.7220 Equiv. 50HRC-
EN 1.4301 Equiv. - -
EN 1.4031 Equiv. 45HRC- -
Coarse Thread EN 1.1191 Equiv. 45-50HRC Electroless Nickel Plating
EN 1.7220 Equiv. 50HRC- Trivalent Chromate
EN 1.4301 Equiv. - -
EN 1.4031 Equiv. 45HRC- -

■Sizes and Dimensions

Screw Shaft Dia.(mm) Length(mm)
3 10-40 (every 5 pitch)
4 10-50 (every 5 pitch), 60
5 10-50 (every 5 pitch), 60
6 15-50 (every 5 pitch), 60

Back to page top

IDEA NOTE Workpieces in a push-push arrangement are cut out one by one for pitch arrangement.

Workpieces are arranged in an even pitch layout by picking them up one by one from a random grouping.

IDEA NOTE Adjusting work supply height

The workpiece supply height is adjusted by the adjustment screw, the angle is set for optimal workpiece ejection.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Back to top

  • * Unit assembly CAD data consists of some sub-assemblies.
       Each sub-assembly unit can be used as it is or can be edited.

Application Overview

Purpose

  • A mechanism to eject workpieces one by one and arrange them in a pitched layout from a stocker.

Points for use

  • Automated mechanism utilizing the stroke of a cylinder.
  • Specifying stand-by position for single axis robot (20mm pitch).

Target workpiece

  • Cylinder shape
  • Exterior shape: Ø5 x L100 (stainless steel) mm
  • Workpiece Mass: 16g

Design Specifications

Operating Conditions or Design Requirements

  • Exterior shape: W210 x D574 x H419mm
  • Cylinder Stroke: 20mm
  • Single axis robot stroke: 140mm
    Stand-by position: 20mm pitch

Required Performance

  • Single axis robot repeatability: ±0.02mm

Selection Criteria for Main Components

  • Single Axis Robot
    • A robot with maximum transferable mass is at or more the holding force needed.

Design Evaluation

Verification of main components

  • The actuators transferable mass is verified based on the holding force for the workpiece.
  • Single Axis Robot Transfer Mass
    • Condition value: Supporting post: 1040g, workpiece catcher: 70g, workpiece: 16g x 4 = 64g, bolt: 30g
    • Workpiece holding section mass M = Supporting post + Workpiece + Bolt, thus, M = (1040 + 70 + 64 + 30) x 10-3 = 1.204kg < Robot transferable mass (6kg)
      -> No problem.

Other Design Consideration

  • Pushing up the next workpiece becomes easier by making the depth of the slide guide equivalent to a single workpiece and the edges chamfered.
  • Horizontal leveling of the base frame is achieved by the adjusting screw.
  • The workpiece drops in the middle of the stroke, and the cylinder stopper is eliminated by making the stopper the end of the 20mm stroke.

Explore Similar Application Examples

Page - / -

Part List

No. Part Name Sample picture MISUMI Part Number
For Price and Days to ship click on Part No.
Quantity
1 Single-Axis Robot RS2 RS212-C1-N-3-150 1
2 Air Cylinders With Twin Guides MGCLF16-20 1
3 Flow Rate Control Valves SPSNL6-M5 2
4 Welded Steel Stands YSFP100-B50-H125-F30-G80-M6 2
5 Screw Stopper ANBNS5-25 2
6 Collars KNCLSS4-8-10 6
7 Dowel Pins MSC4-12 4
8 Socket Head Cap Screws-with Washer SCBS4-10 4
9 Socket Head Cap Screws-with Washer SCBS4-15 16
10 Socket Head Cap Screws-with Washer SCBS5-10 8
11 Socket Head Cap Screws-with Washer SCBS5-15 8
12 Socket Head Cap Screws-with Washer SCBS5-20 12
13 Socket Head Cap Screws-with Washer SCBS6-15 12
14 Socket Head Cap Screws-with Washer SCBS6-20 30
15 Sensors for Air Cylinders ME33L1 2
  • The part list above contains only MISUMI parts.
    The list of parts and machined products of other manufacturers than MISUMI can also be downloaded by part list download (CSV).
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Back to top

Back to top